PT124G-121-M14-152/460

PT124G-121-35MPa-M14-152/460 Extruder Pressure Sensor, PT124G-121 Melt Pressure Sensor Features: Rigid rod, hose isolation, diaphragm isolation structure, standard diaphragm is a corrugated diaphragm coated with titanium nitride, corrosion-resistant and wear-resistant, good stability and accuracy; rigid rod and flexible hose connection, electrical interface adopts explosion-proof structure design, wear-resistant pressure-sensitive diaphragm isolation structure, pressure-sensitive diaphragm thickened and heat-treated via b2b e-commerce network. PT124G-121 Melt Pressure Sensor is interchangeable with similar imported high-temperature melt pressure sensor products such as Dynisco, Gefran, and Dingli. In extrusion production lines, the high-temperature melt pressure sensor PT124G plays an important role in improving melt quality, enhancing production stability on b2b platforms, and protecting production equipment. The high-temperature melt pressure sensor PT124G is used for the measurement and control of high-temperature melt pressure in rubber machinery, plastic extrusion machinery, and other high-temperature melt extrusion equipment.

Main technical parameters of PT124G-121 Melt Pressure Sensor:

1. Range: 0--100MPa;
2. Overall accuracy: 0.5% FS; 1% FS;
3. Output signal: 2mV/V; 3.33mV/V;
4. Supply voltage: 10VDC;
5. Diaphragm temperature resistance: 450°C;
6. Electrical connection: Five-core aviation connector, 5-pin;
7. Thread connection: M14×1.5 (standard); M18×1.5; special design interchangeable with 1/2-20UNF.

Model selection: PT124G-121-35MPa-M14-152/460